EZ-M15 ( Shore A 15 )
Hardness: A15
Pot Life :40 minutes
Cure Time: 4-5 hours
Viscosity: 3000 cps
EZ-M Serial
Description:
Platinum cure mold making silicone rubber(EZ-M Series) is a kind of liquid RTV (room temperature vulcaniza-tion) silicone rubber with two parts, part A is the silicone rubber base, part B is the platinum curing agent. It is the flexible mold making material with different hardness from 0 shore A to 60 shore A. Its mixing ratio is 1:1, which would be suitable for both hand and machine operation. Generally the color is translucent.
Features:
Easy to use
Almost nil shrinkage
Use platinum catalyst
Excellent non-stick effect
High degree of precision in reproduction
High dimensional stability over time and non-deform ability
Food grade silicone (environmental,odorless and nontoxic)
High resistance to high temperature and aging(resist -60 to 200℃)
High chemical resistance to aggressive components of some types of resins
Good tear strength (this feature ensures higher resistance to wearing and shearingApplications:
Platinum cure silicone which are excellent for making molds for chocolate tray, jelly tray, sugar tray, candy molds, cake molds, ice cream, ice sculpture, butter, fondant, bread, baking and other food decorations.
And this kind of silicone is also good for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, prototype design /rapid prototyping, diamond, jewelry and resin rhinestones molding.
Datesheets:
Model NO·
EZ-L20#
EZ-L30#
EZ-M15#
EZ-M25#
EZ-M30#
EZ-M35#
EZ-B10#
EZ-L10#
Mixing Ratio (by weig
ht)
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
Appearance/Color
Translucent
Translucent
Translucent
Translucent
Translucent
Translucent
Translucent
Translucent
Hardness (Shore A)
00-20
00-30
15A
25A
30A
35A
10A
10A
Mixed viscosity (mPa·s)
3000
3000
3000
3000
5000
4800
15000
23000
Working Time (at 23℃/75℉,MINS)
40
40
40
40
40
40
6
8
Curing Time (at 23℃/75℉, HRS)
5
5
5
5
5
5
30
75
Tensile strength, Mpa
≥1.1
≥1.38
≥3.8
≥5.5
≥5.8
≥5.8
228psi
475psi
Tear strength, KN/m
≥5.2
≥6.58
≥19.6
≥26.5
≥24.5
≥24.5
80pli
102pli
Shrinkage, %
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
<0.1
Elongation at break, %
≥450
≥480
≥530
≥520
≥450
≥450
970
1000
Using instructions:
1.Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum- pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .SHIPPING INFO
I'm a shipping policy. I'm a great place to add more information about your shipping methods, packaging and cost. Providing straightforward information about your shipping policy is a great way to build trust and reassure your customers that they can buy from you with confidence.